Renesas EK-RA6M3 Getting Started page 16

Low power applications for ra6 and ra4 groups

Hide thumbs Also See for EK-RA6M3:

Table of Contents

Renesas RA Family

Getting Started with Low Power Applications for RA6 and

RA4 Groups

The following figures show the configurations of AGT0 and AGT1. The count source of AGT0 is the Sub-

Clock, which is available in Low Power modes, and the count source for AGT1 is the AGT0 underflow

interrupt.

Figure 13 shows AGT0 configured in a periodic mode that generates underflow interrupt every second.

Figure 13. AGT0 Properties Configuration using the Properties Tab

AGT1 is also configured in a periodic mode with raw count as the period unit shown in Figure 14.

R11AN0471EU0104 Rev.1.04

Page 16 of 40

Oct.1.21

Table of Contents

Fpb-ra6e1 Fpb-ra4e1 Ek-ra6m2 Ek-ra6m1 Ek-ra4m1 Ek-ra2a1