Functional Characteristics; Series, Model Series, Model And Number; Figure 3 -Typical Name Plate Information - Honeywell SmartLine Multivariable SMV800 Series User Manual

Functional Characteristics

The SMV800 SmartLine Multivariable transmitter measures Differential Pressure, Static Pressure
(Absolute or Gauge), and Process Temperature. These measurements are used to calculate volumetric
or mass flow rates. The measured values and calculated flow may be read by a connected Host.
Available communications protocols include Honeywell Digitally Enhanced (DE) and HART. Output
options include Digital and 4-20 mA Analog.
The SMV800 measures Process Temperature from an external RTD or Thermocouple.
The device may be configured to map any of the five Process Variable to the Analog Output (4-20
mA):

Differential Pressure PV1

Static Pressure PV2

Process Temperature PV3

Calculated Flow Rate PV4

Calculated Totalizer PV6
An optional 3-button assembly is available to set up and configure the transmitter via the Display. In
addition, a Honeywell MCT404/MCT202 Toolkit is available for configuration of HART models.
The SCT SmartLine Configuration Tool (not supplied with the Transmitter) can facilitate setup and
configuration for DE devices.
Certain adjustments can be made through an Experion Station or a Universal Station if the
Transmitter is digitally integrated with Honeywell's Experion or TPS/TDC 3000 control system.

Series, Model Series, Model and Number

The Transmitter nameplate mounted on the top of the Electronics Housing (see
Figure 2) lists the model number, physical configuration, electronics options, accessories,
certifications, and manufacturing specialties.
Figure 3 is an example of a typical SMV800 Transmitter name plate.
The model number format consists of a Key Number with several table selections.
Revision 6.0
Figure 3 –Typical Name Plate Information
SMV800 Series HART/DE Option User's Manual
Page 3