Page 1
RACK MOUNT LEG ROLLER AND LAT TOWER KNEE HOLDER RMLGRL 401082 Operator’s Manual Read the Operator’s Manual entirely. When you see this symbol, the subsequent instructions and warnings are serious follow without exception. Your life and the lives of others depend on it!
Page 2
PARTS DIAGRAM / EXPLODED VIEW DESCRIPTION DESCRIPTION FRONT PLASTIC PLATE FOAM FRAME 68*48*5 LOCK PIN (10) END CAP Φ32*2 FOAM WASHER FLAT WASHER (11) Φ68.5*Φ9.5*3 Φ9*Φ16*1.6 SPACER BUSH (12) SPRING WASHER Φ8 SHORT SPACER BUSH (13) HEX BOLT M8*35 FOAM (14) HEX BOLT M6*10 LONG PLASTIC PLATE...
Page 3
ASSEMBLY INSTRUCTIONS STEP 1 Assemble the LEG ROLLER on the Power Rack properly, using LOCK PIN (2), SPACER BUSH (4), SHORT SPACER BUSH (5) and SCREW M6*4(15). PAY ATTENTION: Leg Roller can be used with different Power Racks such as the X-3 and TITAN Series. Please use Spacer Bush (4), Short Spacer Bush (5), and other accessories according to your needs.
Page 4
ACKNOWLEDGEMENT OF RISK AND RELEASE OF LIABILITY The use of any equipment, including this one, involves the potential risk of injury. Apart from any warranty claim that might be presented for a claimed defect in material or workmanship of the product, you accept and assume full responsibility for any and all injuries, damages (both economic and non-economic), and losses of any type, which may occur, and you fully and forever release and discharge Titan, its insurers, employees, officers, directors, associates, and agents from any and all claims, demands, damages,...
Need help?
Do you have a question about the RMLGRL and is the answer not in the manual?
Questions and answers