Table of Contents
Advertisement
Parameter
Password
Sender
Authentication (Encryption
mode)
Title (Subject)
Attachment
Mail Receiver
Interval
Health Mail
Update Period (interval)
Email Test
UPnP
6.3.6.
It allows you to establish the mapping relationship between the LAN and the public network.
Here you can also add, modify or remove UPnP item. For UPnP on different routers, you must disable
UPnP function. See Figure 6-25.
In the Windows OS, From [Start] → [Control Panel] → [Add or remove programs]. Click the "Add/Remove
Windows Components" and then select the "Network Services" from the Windows Components Wizard.
Click the [Details] button and then check the "Internet Gateway Device Discovery and Control client" and
"UPnP User Interface". Click the [OK] button to begin installation.
Enable UPnP from the Web. If your UPnP is enabled in the Windows OS, the network camera can auto
detect it via the "My Network Places".
Under manual mode, you can modify external port. Under auto mode, select idle port for auto port mapping
without user modification.
The password of sender email account.
Sender email address.
You can select SSL, TLS or None.
Input email subject here.
System can send out the email of the snapshot picture once you check
the box here.
Input receiver email address here. Max three addresses.
The send interval ranges from 0 to 3600 seconds. 0 means there is no
interval.
Note that the system will not send out the email immediately when the
alarm occurs. When the alarm, VMD Audio Detection or the abnormity
event activates the email, system sends out the email according to the
interval you specified here. This function is very useful when there are
too many emails activated by the abnormity events, which may result in
heavy load for the email server.
Check the box here to enable this function.
This function allows the system to send out the test email to check the
connection is OK or not.
Check the box to enable this function and then set the corresponding
interval.
System can send out the email regularly as you set here.
The system will automatically sent out an email once to test the
connection is OK or not. Before the email test, save the email setup
information.
Function
41
Advertisement
Table of Contents
