Display - Teac PD-505T Owner's Manual

Automatic power saving function
This unit has an automatic power saving function (page 20).
By default, the setting is ON.
The unit will automatically enter standby mode if no audio is output
and no operation is conducted for about 30 minutes.
Set the automatic power saving function to OFF to disable it
(page 20).
Display brightness
You can adjust the brightness of the unit's display (page 19).
By default, the setting is Slightly BRIGHT (Stays lit dimly).
When set to AUTO OFF (automatic illumination off ), the display
turns off when not being operated.
o NO DISC and other warnings will stay lit.
When on
Z
After the display appears as above, it will show the status.
When no disc is available
Display example: stopped
TRACK 8
22
Total number of
tracks on disc
When a disc is playing or paused, press the DISPLAY button to
change the display as follows.
Display example: playing back
TRACK 7
1
Number of track
being played
TRACK 7
1
Number of track
being played
TRACK 7
1
Number of track
being played

Display

NO DISC
68:25
Total playback time
(minutes: seconds)
0:02
Elapsed time of track
being played
(minutes: seconds)
REMAIN
2:36
Remaining time of track
being played
(minutes: seconds)
T.REMAIN
68:23
Remaining disc time
(minutes: seconds)
EN
13