IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO 5) Do not use this apparatus near water. NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE 6) Clean only with dry cloth.
Page 3
THE ELECTRONICS. NO USER SERVICEABLE PARTS ARE WITHIN! For U.S.A. < IF YOU ARE EXPERIENCING PROBLEMS WITH THIS PRODUCT, CONTACT TEAC FOR A SERVICE REFERRAL. DO NOT USE THE PRODUCT UNTIL IT HAS BEEN REPAIRED. < USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Information for Users on Collection and Disposal of Old Equipment and used Batteries These symbols on the products, packaging, and/or Thank you for choosing TEAC. Read this manual carefully to accompanying documents mean that used electrical and get the best performance from this unit.
Before Use Read this before attempting any operations. Beware of condensation When the unit (or a disc) is moved from a cold place to a warm < As the unit may become warm during operation, always leave place, or used after a sudden temperature change, there is a sufficient space around the unit for ventilation.
They can damage the unit. the CD standard may not play back correctly in this unit. If you use such discs in this unit, TEAC Corporation and its subsidiaries cannot be responsible for any consequences or guarantee the quality of reproduction.
MP3 and WMA Remote Control Unit This unit can play MP3 and WMA files recorded on a CD-R or CD-RW You can operate the unit using the supplied remote control unit disc. RC-1182. When operating the remote control unit, point it towards the <...
Connection AG-H600 series receiver SYSTEM CONTROL (LINE IN) PD-H600 DIGITAL IN (COAXIAL) CD recorder etc. CAUTION < Switch off the power to all equipment before connecting any components. < Read the instructions of each component you intend to use with...
Page 9
< Make sure that the cable is firmly inserted. C SYSTEM CONTROL jack If you have TEAC AG-H600 series receiver, convenient system control functions are available. Connect it to the SYSTEM CONTROL jack on the AG-H600 series receiver with the provided system control connection cord.
Parts Identification POWER Press this switch to turn the unit on or off. The standby indicator lights orange when the unit is in the standby mode. When the unit is turned on, the indicator lights blue. < If you use the system control function, leave the power switch being on. Disc tray Skip (.//) Use these buttons to skip tracks/files.
Page 11
CLEAR Use this button to clear a programmed track. (See page 16.) Search (m/,) During playback, use these buttons to search the part you want to listen to. (See page 13.) FILE (°/‡) Use these buttons to select a file of MP3/WMA. (See page 14.) SHUFFLE Use this button to enter the shuffle playback mode.
Basic Playback Audio CD: Stop 43:08 Total number Total play time of of the tracks the disc Press the POWER switch to turn the unit on. MP3/WMA disc: Standby indicator Stop Total Files 144 Total number of files of the disc <...
Page 13
Note To skip to the next or a previous track/file < It takes a few seconds to load a disc. No buttons work during Press the skip buttons (.//). loading. Wait until the total number of the tracks and/or the total play time of the disc are displayed.
Direct Track/File Selection Folder/File Search You can use the numeric buttons of the remote control to select a While playing or playback is stopped, you can select and play a track/file. desired folder or a desired file in an MP3/WMA folder. Press the numeric buttons to select a track/file.
Repeat Playback Shuffle Playback When the SHUFFLE button is pressed, the tracks/files of the disc are played randomly. Each time you press the REPEAT button, repeat playback changes as follows: CD/3 SFL RP 1 (Repeat one track) 00:13 RP F (Repeat folder)* <...
Programmed Playback (Audio CD only) Note < When you stop programmed playback, the total number of the CLEAR programmed tracks and total time are shown on the display. < When you press the SHUFFLE button during programmed playback or you press the SHUFFLE button then press the play/ pause button (G/J) while programmed playback is stopped, shuffle playback starts, but program mode will not be cancelled.
Dimmer To delete a track from the program While playback is stopped, press the PROGRAM button repeatedly until the track number to be deleted appears on the display, then press the CLEAR button. Each time you press the DIMMER button, the display changes as follows: NORMAL (Normal) The selected track is deleted from the program and the next track...
Display Changing the information Changing the time information (Audio CD only) You can change the information on the display. You can change the time information for audio CD playback. Each time you press the DISPLAY button, the information changes as follows. Each time you press the TIME button during playback, the time information changes as follows: Audio CD:...
Less than 0.003 % (1 kHz) yourself before you call your dealer or a TEAC service center. Signal-to-Noise Ratio (S/N) (at 20 kHz LPF) More than 110 dB (1 kHz, 0 dB, A weight) No power.
Page 20
7733 Telegraph Road, Montebello, California 90640 Phone: (323) 726-0303 TEAC CANADA LTD. 5939 Wallace Street, Mississauga, Ontario L4Z 1Z8, Canada Phone: (905) 890-8008 TEAC MEXICO, S.A. de C.V Rio Churubusco 364, Colonia Del Carmen, Delegación Coyoacàn, CP 04100, México DF, México Phone: (5255)5010-6000 TEAC UK LIMITED Unit 19 &...