Remote Control Operation; Time Counter Display - Teac CD-P1440 Owner's Manual

Intro Check ( Remote Control )
During playback or in the stop mode, press the INTRO CHECK
button. The beginning of each track is played for 10 seconds.
1. Press the INTRO CHECK button and INTRO indicator will
be on.
The number of the currently played track blinks on the
MUSIC CALENDER. If a track with a number higher than 21
is being played, OVER indicator will blink.
2. Press the INTRO CHECK button again to clear the Intro
Check function.
... The intro check function also works together with RANDOM,
REPEAT ALL and PROGRAM functions.
... This function will not stop until the STOP button is pressed.

Time Counter Display

The time counter shows various time readouts, as follows.
1. Elapsed time display
When playback begins, the elapsed time of the track being
played is displayed in minutes and seconds.
2. Total disc playback time
Press the TIME button once, and total disc playback time
and total number of the tracks on the disc is displayed.
3. Remaining time display ( REMAIN )
Displayed when the TIME button is pressed once during
playback. This provides an easy check of the remaining time
of the track being played.
4. Total remaining time display ( TOTAL REMAIN )
Displayed when the Time button is pressed twice. The time
displayed is the total remaining playback time from the
position being played, to the end of the disc; the counter
counts down to "00:00" during playback.
12

Remote Control Operation

The provided Remote Control Unit allows the unit to be
operated from a distance.
When operating the remote control unit, point it towards the
remote sensor on the front panel of the unit.
... Even if the remote control unit is operated within the effective
range, remote control operation may be impossible if there
are any obstacles between the player and the remote control.
... If the remote control unit is operated near other appliances
which generate infrared rays, or if other remote control
devices using infrated rays are used near the player, the
player may operate incorrectly. In the reverse way, the other
appliances may operate incorrectly.
Battery Installation
1. Remove the battery compartment cover.
2. Insert two "AA" (R6, SUM-3) dry batteries.
Make sure that the batteries are inserted with their positive ±
and negative — poles positioned correctly.
3. Close the cover until it clicks.
Battery Replacement
If you notice that the distance between the remote control unit
and the player for correct operation becomes shorter, it
indicates that the batteries are exhausted. In this case replace
the batteries with new ones.
Precautions concerning batteries
... Be sure to insert the batteries with correct positive ± and
negative — polarities.
... Use batteries of the same type. Never use different types of
batteries together.
... Rechargeable and non-rechargeable batteries can be used.
Refer to the precautions on their labels.
... When the remote control unit is not to be used for a long time
(more than a month), remove the batteries from the remote
control unit to prevent them from leaking. If they leak, wipe
away the liquid inside the battery compartment and replace
the batteries with new ones.
... Do not heat or disassemble batteries and never dispose of
old batteries by throwing them in a fire.