Troubleshooting - BOMANN KS 2261 Instruction Manual

Hide thumbs Also See for KS 2261:
Table of Contents

Advertisement

Available languages

Available languages

CAUTION:
CAUTION:
CAUTION:
CAUTION:
• Do not use a wire brush or other sharp, abrasive items.
• Do not use any acidic or abrasive detergents.
• Do not damage the refrigerant circuit.
Cleaning the appliance including interior
Cleaning the appliance including interior
Cleaning the appliance including interior
Cleaning the appliance including interior
• Clean the appliance interior, the exterior surfaces, the accessories and the door seal regularly with warm
water and mild detergent.
• Remove for that the appliance content and storage at a cool location.
• After everything was thoroughly dried, you can restart the operation.
Defrosting
Defrosting
Defrosting
Defrosting
To achieve better cooling and to save energy, defrost the appliance regularly. To start the defrosting process
turn the temperature control to the off state and disconnect the plug or turn off the fuse. Remove the food
items and keep covered at a cool location. When the ice has melted, wipe the condensate away and dry the
device interior. You may then restart the device by connecting the plug and turning the temperature control.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Never use metal objects (e.g. knives) for removing possibly ice from the vaporizer. The vaporizer could be
damaged. A defect vaporizer could cause serious damages.
Reverse the bulb
Reverse the bulb
Reverse the bulb
Reverse the bulb
Lamp specifications: 220- - - - 240 V
Lamp specifications: 220
Lamp specifications: 220
Lamp specifications: 220
• Remove the condensate drip tray beneath the ice compartment; pull it out to the front.
• Replace the defective bulb.
• Insert the condensate drip tray back into its original position.
• Reconnect the appliance and put it in operation again.
B B B B efore you contact an authorized specialist
efore you contact an authorized specialist
efore you contact an authorized specialist
efore you contact an authorized specialist
Problem
Problem
Problem
Problem
Possible cause
Possible cause
Possible cause
Possible cause
The appliance is
- Is the unit not connected to mains power?
not working
- Is the temperature properly set?
properly or at all
- Is the place unqualified?
- Does the content prevent the appliance
door from closing properly?
- Are the ventilation openings clear of ob-
struction?
240 V ~ , max. 10
, max. 10 W W W W
240 V
240 V
, max. 10
, max. 10

Troubleshooting

Troubleshooting
Troubleshooting
Troubleshooting
Solution
Solution
Solution
Solution
- Insert the plug properly in the contact socket.
Check the fuse.
- Check the temperature setting.
- Check the ambient temperature.
- Check the appliance content.
- Unblock the ventilation openings, install the
appliance freely.
22

Advertisement

Table of Contents
loading

Table of Contents