Toro GrandStand 79534 Operator's Manual page 21

4
3
2 4
Figure 21
1. Front reference bar
2. Left control lever
3. Rear reference bar
3. To go forward, move the speed-control lever to the
desired speed.
4. Slowly push the motion-control levers forward
22).
Note: The engine stops if you move a motion-control
lever with the parking brake engaged.
Note: The farther you move the motion-control levers
in either direction, the faster the machine moves in that
direction.
Note: To stop, pull the motion-control levers back
to the N position.
EUTRAL
2
1
5
G020531
4. Right control lever
5. Right control lever in the
N - position
EUTRAL LOCK
(Figure
Driving Backward
1. Move the right motion-control lever to the center,
unlocked position.
2. Slowly pull the motion-control levers rearward
23).
21
Figure 22
Figure 23
(Figure