Using The Projector To Charge Devices; Using The Audio Out Jack; Powering The Projector On/Off - Kodak LUMA 450 User Manual

10. USING THE PROJECTOR TO CHARGE DEVICES

11. USING THE AUDIO OUT JACK

While the projector does include two (2) built-in speakers for regular use, you can also connect either
headphones or a portable speaker to the 3.5 mm AUDIO OUT jack as shown in the below image.
NOTE: External speakers can also be connected
to the projector via Bluetooth.

12. POWERING THE PROJECTOR ON/OFF

To turn the projector on or off, hold the power button on the side for three (3) seconds. Once powered
on, tap the power button lightly to display the remaining battery percentage on the screen.
NOTE: The projector can also be turned on or off with the
remote control by pressing the POWER button.
8