Install Batteries Into The Remote Control; Set Up The Projector - Kodak FLIK HD9 User Manual

INSTALL BATTERIES INTO THE REMOTE CONTROL

1. Press down and slide off the
battery cover.
2. Insert the two (2) AAA batteries
into the battery compartment.
3. Place the battery cover back on
the remote control.

SET UP THE PROJECTOR

1. Place the projector in front of a suitable projection screen or wall.
2. Connect the AC adapter to the power cord.
3. Then, connect the power jack of the AC adapter to the projector.
4. Connect the wall plug of the power cord to a wall outlet. The LED indicator on the
back of the projector will light up red.
Power button on the projector or remote control to turn on the device.
5. Press the
The LED indicator will then turn green.
EN | 9