Install Batteries Into The Remote Control; Set Up The Projector - Kodak FLIK HD10 User Manual

INSTALL BATTERIES INTO THE REMOTE CONTROL

1. Press down and slide off the battery cover.
2. Insert the two (2) AAA batteries into the battery compartment.
3. Place the battery cover back on the remote control.

SET UP THE PROJECTOR

1. Place the projector in front of a suitable projection screen or wall.
2. Connect the AC adapter to the power cord.
3. Then, connect the power jack of the AC adapter to the projector.
4. Connect the wall plug of the power cord to a wall outlet. The LED indicator on the
back of the projector will light up red.
10 | EN