Panasonic LUMIX DMC-TZ82 Operating Instructions Manual page 83

For details on how to select the [Setup] menu settings, refer to (→65).
[TV Connection] (continued)
■
[HDMI Mode (Play)]
Set the format for the HDMI output when playing back on the HDMI compatible high-
definition TV connected with this unit using the HDMI micro cable.
Settings
[AUTO]
[4K]
[1080p]
[1080i]
[720p]
* *
[576p] 1 /[480p]
*
1
When [Video Out] is set to [PAL]
*
2
When [Video Out] is set to [NTSC]
●
If no image appears on the TV with [AUTO], switch the setting to a constant setting other than
[AUTO] to set a format supported by your TV. (Please read the operating instructions for the TV.)
■
[HDMI Info Display (Rec)]
TZ100/TZ101
Set whether or not to display information when recording a picture on the camera while
monitoring it on a TV, etc., connected to the camera via an HDMI micro cable.
Settings
[ON]
The camera display is output as is.
[OFF]
Only images are output.
83
Automatically sets the output resolution based on information from a
connected TV.
Outputs pictures with a resolution of 3840×2160 pixels using a progressive
scan method for the number of effective scanning lines (2,160 lines).
Outputs pictures using a progressive scan method for the number of effective
scanning lines (1,080 lines).
Outputs pictures using an interlace scan method for the number of effective
scanning lines (1,080 lines).
Outputs pictures using a progressive scan method for the number of effective
scanning lines (720 lines).
Outputs pictures using a progressive scan method for the number of effective
2
scanning lines (576
* *
1 2
/480 lines).
Basics
Using the [Setup] menu
DVQP1246