Optimising the focus and brightness for a touched position
Recording mode:
You can optimise the focus and brightness for the position you have touched.
1
Set the menu
→
2
Touch the subject you want to optimise the brightness
for
• The AF area setting screen appears.
• The brightness optimisation position is displayed on the centre of
the AF area. The position follows the movement of the AF area.
• [Metering Mode] is set to [
[Touch AE].
• Touching [Reset] returns the brightness optimisation position and
the AF area to the centre.
3
Touch [Set]
• The AF area with the same function as [
• If you touch [
optimisation position is cancelled. The AF area setting is also cancelled.
• If you touch [
optimisation position is cancelled.
When the background has become too bright, etc.,
the brightness contrast with the background can be
adjusted by compensating the exposure.
●
When recording with the Touch Shutter, the focus and brightness are optimised for the touched
position before recording takes place.
●
At the edge of the screen, the metering may be affected by the brightness around the touched
location.
●
The [AF+AE] does not function in the following cases:
• When using the Digital Zoom
• When the AF area has been set by using the cursor button
• When [4K Live Cropping] is set
162
[Custom] → [Touch Settings] → [Touch AF] → [AF+AE]
], which is used exclusively for the
], the Metering Mode returns to the original setting, and the brightness
], the Metering Mode returns to the original setting, and the brightness
Adjusting the focus and brightness (exposure)
(→157)
] is displayed on the touched position.
Taking pictures with Auto Focus
Reset
Reset
Set
Set
DVQP1246