Settings; Common Settings In All Versions (Lite/Bt/Ultra) - Nokta Simplex LITE User Manual

SETTINGS

Press the Power & Settings button to access all
settings. When the Power & Settings button is pressed,
the volume setting, which is the first setting on the
settings bar located at the bottom of the screen, will be
displayed in a black window. Each time you press the
right or left button, the next setting on the bar will be
selected and its value will be displayed on screen. You
can change the value using the plus (+) and minus (-)
buttons.
To exit the settings, press the Power & Settings
button again. While in the settings menu, if no button
is pressed for a while, settings will time out and the
device will revert back to the main screen.
COMMON SETTINGS IN ALL VERSIONS
(LITE/BT/ULTRA)
Volume
This control allows you to increase or decrease
the device's volume based on your preference and
environmental conditions. After pressing the Power
& Settings button, use the right and left buttons to
select the Volume setting. Volume setting consists of 5
levels and is adjusted by using the plus (+) and minus
(-) buttons.
4 99
When you turn off and on the device it will start with
the last volume level you chose. This setting is common
to all modes; changes will take effect in all modes.
When you plug in any wired headphones to SIMPLEX,
a headphone icon will appear in the settings and main
screen. The volume level will be indicated with boxes
with dots instead of black boxes.
Because the volume level affects power consumption,
we recommend you not to increase it more than
necessary.
Notch Discrimination
Use the Notch Discrimination setting to eliminate
unwanted metals from detection such as trash.
SIMPLEX's Notch Discrimination feature consists of
50 boxes and each box represents 2 IDs. With the
Notch Discrimination setting each ID can be rejected or
accepted based upon your preference.
LITE and BT versions:
1. After entering settings by pressing the Power &
Settings button, use the right and left buttons to select
the Notch Discrimination setting. The Target ID will be
displayed on the screen and arrow cursor will appear
underneath the ID scale at the top of the screen.
16
1 2
15