Table of Contents
Advertisement
6. Install the slim optical drive with the bracket into the kit.
7. Slide the kit into the flex bay and reconnect the disconnected cables to the kit.
8. Reinstall all removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
3.5-inch storage drive
1. Remove the computer cover. See "Computer cover" on page 52.
2. Ensure that all the cables are disconnected from the kit. Remove the kit from the front of the computer.
3. Open the rear cover of the kit.
4. Remove the conversion bracket from the kit.
.
63
Chapter 8
CRU replacement
Advertisement
Table of Contents
