Table of Contents
Advertisement
8. Install the new 3.5-inch storage drive with the conversion bracket into the storage drive bay.
9. Connect the signal cable and the power cable to the new storage drive.
10. Reinstall all removed parts. Then, reconnect the power cord and all disconnected cables to the
computer.
Storage drive cage
Prerequisite
Before you start, read Appendix A "Important safety information" on page 105 and print the following
instructions.
Your computer might come with an optional storage drive cage.
Replacement procedure
1. Remove the computer cover. See "Computer cover" on page 52.
.
Chapter 8
CRU replacement
71
Advertisement
Table of Contents
