Mocka Eclipse Bedside Table Assembly Instructions Manual page 9

Eclipse
Bedside Table
15
V
Z
W
Attach 4x wedges (J) into the corners of the back of the
unit and secure with 4x screws (K). Tighten with a screwdriver.
Attach 1x safety straps (V) to the top of the back side of
the unit as shown using 1x washers (Z) and 1x screws (W).
Tighten with a screwdriver.
mocka.co.nz I mocka.com.au I PO BOX 18, Pinkenba QLD 4008
J
K
V
J
K
Z
W
16
X
Z
Y
Once assembled lift furniture into place, do not drag. Use a drill to create
a small hole lining up with the top of the safety strap (V). Fasten to the wall
using 1x washers (Z), 1x wall anchor (X) and 1x wall screw (Y). Ensure unit is
balanced and steady before use. You're done, enjoy!
strap
wall
anchor
screw