Table of Contents
Advertisement
Web Interface
Login User Account
You will need to enter a User Name and Password to login to the interface, and can select
a preferred language after login. There are two user account types.
1. Administrator
- Default user name: cyber
- Default password: cyber
2. View only
- Default username: device
- Default password: cyber
You will be asked to reset a password upon the first login. The administrator can access all
functions, including enable/disable the view only account. The viewer can access read only
features but cannot change any settings.
Note: 1 . The Administrator account User Account Authentication HyperText Transfer
Protocol (HTTP) HTTP and HyperText Transfer Protocol over Secure Sockets
Layers (HTTPS) is also used for the FTP login, Power Device Network Utility, and
Upgrade and Configuration Utility.
2 . Only one user can log in and access the device at a time.
Web Content
Note: English is the default language and you can change to a preferred language.
[Summary] Provide an overview of the system operation and the items that are auto
refreshed; however, different UPS system models may have different items displayed.
Item
Current Condition
UPS Status
Battery Capacity
Load
Remaining Runtime Length of time the UPS can support its load on battery power.
System Data
Name
Location
Contact
Uptime.
Envir Status
Temperature
Humidity
Display the current operating condition of the UPS and
environmental sensor.
Graph of the percentage of the current UPS battery capacity.
Graph of the load of UPS as a percentage of available Watts.
The name given to the UPS.
Location description given to the UPS.
The person to contact about this UPS.
Length of time the system has been working continuously
Graph of the current temperature reading of the environmental sensor.
Graph of the current humidity reading of the environmental sensor.
Definition
9
Advertisement
Table of Contents
