Appendix 5: How To Update Kernel Version - CyberPower RMCARD400 User Manual

Obtain IP Address for Linux Operating System
The instructions in
section is for Windows OS. For Linux Operating System, please use PowerPanel®
Business Remote software to scan and obtain the IP address. To do this, go to
[Power->Configuration] on the PowerPanel® Business Remote web interface, as shown in
Figure 12. The PowerPanel® Business Remote web interface

Appendix 5: How to Update Kernel version

interface of the RMCARD. There is one file to update in order to upgrade the kernel version.
- cpsrkernel_XXX
Note: To ensure keeping RMCARD kernel up to date, please visit CyberPower website every 3
months to see if there is any updated kernelversion available.
1. Change operation mode via serial connection
Change operation mode via serial connection, the PC/server must be connected
directly to the Universal port of the RMCARD using the included RJ45/DB9 Serial Port
Connection Cable, and perform the following steps.
Step 1. Open Hyper Terminal software (eg. PuTTY, HyperTerminal, or Tera Term) on
your PC and select a name and icon for the connection.
Step 2. Setup the COM port settings using the following values
*Bits per second: 115200
*Data bits: 8
*Parity: None
*Stop bits: 1
*Flow control: None
the IP address for the CyberPower Remote Management
[System->About] page on the web user
70