Rmcard Firmware Upgrade - CyberPower RMCARD400 User Manual

RMCARD Firmware Upgrade

By upgrading the firmware, you can obtain both the new features and updates/
improvements to existing functionality. FTP service needs to be Enabled before attempting
[System->About] page on the web user interface of the RMCARD. There is one file to
update in order to upgrade the firmware version.
- cpsrm4safw_XXX
Note: To ensure keeping RMCARD firmware up to date, please visit CyberPower website
every 3 months to see if there is any updated firmware version available.
Note: Please do not turn the UPS off when processing the Firmware upgrade.
Note: To update the RMCARD firmware successfully, please check whether the
connections to Port 20 and 21 in firewall are not blocked.
Method 1: Using FTP command
Use the following steps to upgrade the firmware:
1. Download the latest firmware
2. Extract the downloaded files to
3. Open a command prompt window
4. Login to the CyberPower Remote Management Card with FTP command, in the
command prompt type:
(1) ftp
(2) ftp> open
(3) To [current IP address of RMCARD] [port]; EX: To 192.168.22.126 21
(4) Input USER NAME and PASSWORD (same as the administrator account in web user
interface, see page 6 for default factory settings)
5. Upload file :
ftp > put cpsrm4safw_XXX
6. Upload is now complete, type:
ftp > quit
7. The system will reboot after you type
\
56