Table of Contents
Advertisement
9. Communication Port
9.1. USB Interface
The USB port is compliance with USB 1.1 protocol for its communication software.
9.2. Dry contact Interface(optional)
This series UPS has independent dry contact interface. Please contact your local
distributor for details.
9.3. RS232 Interface
The RS232 port is available for UPS monitoring, control, and firmware updates.
9.4. Intelligent slot
This series is equipped with an intelligent slot for other optional card to achieve
remote management of the UPS through internet / intranet. Please contact your local
distributor for further information.
6F, No. 32, Sec. 1, Chenggong Rd., Nangang District, Taipei 115, Taiwan
Entire contents copyright
in part without permission is prohibited. PowerPanel
Edition are trademarks of CyberPower Systems Inc.
CyberPower Systems Inc.
www.cyberpower.com
©
2013 CyberPower Systems Inc., All rights reserved. Reproduction in whole or
®
Business Edition and PowerPanel
37
®
Personal
Advertisement
Table of Contents
Troubleshooting
