Hand Alignment Adjustment; Adjusting Hand Alignment; Other Settings; Enabling The Button Operation Tone - Casio 5582 Operation Manual

Hand Alignment
Adjustment
Strong magnetism or impact can cause the
time indicated by the analog hands to become
different from the time on the digital display. If
this happens, adjust hand alignment.
Getting Ready
Enter the Timekeeping Mode.
Navigating Between Modes
l

Adjusting Hand Alignment

1.
Hold down (A) for about five seconds.
Release the button when [00] starts to
flash.
This enables adjustment of second hand
alignment.
After two seconds After five seconds
Second hand
2.
If the second hand is not at 12 o'clock, use
(B) and (E) to align it.
3.
Press (D).
This enables adjustment of mode hand
alignment.
Mode hand
4.
If the mode hand is not at 12 o'clock, use
(B) and (E) to align it.
Operation Guide 5582
5.
Press (D).
This enables adjustment of the hour and
minute hands.
Hour hand
6.
If the hour hand and minute hand are not
at 12 o'clock, use (B) and (E) to align them.
7.
Press (A) to exit the setting screen.

Other Settings

Getting Ready
Enter the Timekeeping Mode.
Navigating Between Modes
l
Enabling the Button
Operation Tone
Use the procedure below to enable or disable
the tone that sounds when you press a button.
1.
Hold down (A) for about two seconds.
Release the button when the currently
selected Home City name appears on the
display.
2.
Press (D) 11 times.
This causes [KEY♪] or [MUTE] to flash on
the display.
3.
Minute hand
4.
Note
Configuring Power Saving
Function Settings
1.
2.
Home City
3.
4.
Note
Use (E) to select [KEY♪] or [MUTE].
[KEY♪]: Operation tone enabled.
[MUTE]: Operation tone muted.
Press (A) to exit the setting screen.
Note that alarm and timer tones will still
●
sound even while the operation tone is
muted.
Hold down (A) for about two seconds.
Release the button when the currently
selected Home City name appears on the
display.
Home City
Press (D) 15 times.
This displays [P.SAVE].
Press (E) to toggle the setting between
enabled (on) and disabled (off).
[ON]: Power Saving enabled.
[OFF]: Power Saving disabled.
Press (A) to exit the setting screen.
For details about Power Saving, refer
●
to the information below.
Power Saving Function
l
17