Advertisement
02 - VIPS Hardware Installation
Beacon (VIPS-B-V1) Installation
When first considering a VIPS installation or demonstration, it is important to understand the shape and size of the test
area and thus the minimum number of beacons that will be required.
VIPS will need at least 6 beacons in view at any one time to compute a solution. For a simple installation, Racelogic
recommend placing the beacons in a 'Square' formation with spacing between the beacons of around 25–30 m, as
below.
The beacons require a
9 – 36 V power source
that is connected to the
2 way Lemo
connector. The
other Lemo
connector
on the beacon is for Firmware upgrades and should be covered with the supplied splashproof plug to ensure
waterproofness.
https://en.racelogic.support//VBOX_Indoor_Positioning_System_(VIPS)/VIPS_User_Guide/02_-_VIPS_Hardware_Installation
5
Advertisement
