Racelogic VIPS User Manual page 4

Beacon
LED Colour
Solid Blue
Flashing Blue
Solid Green
Blinking Green
Solid Red
Flashing Red
Rover
LED Colour
Solid Blue
Flashing Blue
Solid Green
Blinking Green
Flashing Green
Flashing Orange
Solid Orange
Solid Red
https://en.racelogic.support//VBOX_Indoor_Positioning_System_(VIPS)/VIPS_User_Guide/01_-_VIPS_Introduction
Status Description
The unit is Bootloader mode
The unit is connected via an active Bluetooth link
The unit has been used for ranging within the last
second
The unit is idle
There is a non recoverable fault (such as an invalid reply
to a radio ID request)
The unit does not have a site configuration
Status Description
The unit is Bootloader mode
The unit is connected via an active Bluetooth link
The rover is in 'Stand alone Mode' and receiving ranging
data from at least 3 beacons
The unit is looking for Beacons/ The unit is reading the
site information/ The unit is set to beacon mode
The rover cannot see at least 3 beacons
The unit is syncing the IMU
The unit is waiting for VBOX communication (if
connected is selected)
There is a non recoverable fault (such as an invalid reply
to a radio ID request)
VB3i
4