All V/M Transmit; Voice Transmit - Yamaha SY35 Product Manual

UTILITY MIDI
Details: MIDI system exclusive data is transmitted
by the SY35 when one of the voice transmit
functions described below is used. The same
type of data will also be automatically loaded
into the SY35 memory when received from a
second SY35 or other MIDI device, thus erasing
Summary: Initiates MIDI bulk transmission of all
voice and multi-play data.
Settings: None
Procedure: Use the
the lower display line. "Are you sure?" will
appear on the display. Press the [+1/YES] key
to begin transmission, or the [-1/NO] key to
cancel. "Transmitting!!" will appear on the dis-
p l a y during
"»Completed!!«" will appear briefly when
transmission has finished.
Summary: Initiates bulk transmission of the data for
a specified SY35 voice.
Settings: Source: I, C, P
Bank: 1 ... 8
Number: 1 ... 8
Procedure: Use the
used to move the cursor to the source, bank, or
number parameter. Use the [-1/NO] and
[+1/YES] keys to set the selected parameter as
necessary. When the desired voice number has
been selected, move the cursor to the Yes/No?
parameter and press the [+1/YES] key to begin
transmission.
56

ALL V/M TRANSMIT

key to move the cursor to
t r a n s m i s s i o n , and

1 VOICE TRANSMIT

and cursor keys are
previous data. This function can be turned "off"
to prevent accidental erasure of the internal
memory, or the memory of external equipment,
do to mistaken data reception or transmission.
Details: This function is useful for transferring all
the voice and multi-play data in the INTERNAL
memory from one SY35 to another. If the MIDI
OUT of the transmitting SY35 is connected to
the MIDI IN of the receiving SY35 via a MIDI
cable, the receiving unit will automatically
receive and load the data as long as its internal
memory protect function is turned "off" and
EXCLUSIVE ON/OFF is turned "on." Another
possibility is to transfer the data to a MIDI bulk
data storage device for long-term storage.
"Transmitting!!" will appear on the display dur-
ing transmission, and "»Completed!!«" will
appear briefly when transmission has finished.
Details: Like the ALL V/M TRANSMIT function
described above, the 1 VOICE TRANSMIT
function is ideal for transferring voice from one
SY35 to another, or to a MIDI bulk storage
device for long-term storage.
In this display the source, bank and number
parameters are shown in the standard SY35
voice number format. "P12," for example, is pre-
set bank 1, number 2; "I35" is internal bank 3,
number 5, etc.