Procedure: Use the
cursor to the lower display line. The [-1/NO]
and [+1/YES] keys are used to turn control
change reception/transmission on or off.
Summary: Turns keyboard after touch on or off.
Settings: on, off.
Procedure: Use the
sor to the lower display line. Use the [-1/NO]
and [+1/YES] keys to turn after touch on or off.
Summary: Turns pitch bend control on or off.
Settings: on, off.
Summary: Turns transmission/reception of MIDI
system exclusive data on or off.
Settings: on, off.
cursor key to move the
AFTER TOUCH ON/OFF
cursor key to move the cur-
PITCH BEND ON/OFF
EXCLUSIVE ON/OFF
Details: The "off setting turns MIDI control
change reception and transmission off so that
control change messages corresponding to
modulation, volume and other functions will be
ignored by the SY35 when received, and the
SY35 will not transmit any control change
messages.
Details: When after touch is turned "off," internal
SY35 after touch will function normally but no
MIDI after touch data will be transmitted or
received.
Keyboard after touch generates a tremendous
amount of MIDI data, so you might want to turn
after touch "off when recording to a MIDI
sequencer in order to preserve memory capacity.
Procedure: Use the
sor to the lower display line. Use the [-1/NO]
and [+1/YES] keys to turn pitch bend control on
or off.
Details: When pitch bend control is turned "off,"
the SY35 pitch bend wheel will function normally
but no MIDI pitch bend wheel data will be trans-
mitted or received.
Procedure: Use the
sor to the lower display line. Use the [-1/NO]
and [+1/YES] keys to exclusive transmis-
sion/reception on or off.
UTILITY MIDI
cursor key to move the cur-
cursor key to move the cur-
55