Table of Contents
Advertisement
Pellet container
Burn all pellets and brush the container clean.
6.3 Periodically maintenance – after about 500 hours of use
If the stove is placed in dusty surroundings, it may be necessary to clean the ventilator. Clean the brazier for
ash and cinders, e.g. with a scraper. Clean the air pathway for electrical igniter for ash and cinders that might
be covering the hole placed on the left side of the tube under the brazier, e.g. using a small, straight
screwdriver.
For further information regarding maintenance of the stove, please go to www.adurofire.com.
6.4 Yearly maintenance
The yearly maintenance must be conducted by a professional. Contact your local Aduro GO partner for
further information as rules for chimney sweeping and stove maintenance differ from area to area.
The chimney must be maintained and swept according to local rules.
The Aduro Hybrid stove must be inspected after one year for cleaning and adjustment. Hereafter,
maintenance must be conducted by an Aduro certified professional every other year or for every 2,000 kg
pellets burned.
6.5 Other maintenance
Gaskets
With time, gaskets around glass and door will wear. We recommend that you inspect them regularly. If
leakages appear, they must be replaced.
Combustion chamber
The fireproof tiles in the combustion chamber eventually wear out and should be replaced when the cracks
are more than 0.5 cm. The durability of the tiles depends on how often and how intensively the stove is used.
You can change the tiles yourself. They are available as a ready-to-use set. For further information, go to
www.aduroshop.com.
How do I remove the Bauart spring?
All Aduro stoves are fitted with a "Bauart" safety spring. The mechanism ensures that the door of the stove
closes automatically. The "Bauart" spring is only a law requirement in Germany.
How to remove it:
If you wish to remove or replace the spring with a new one it is possible to cut the spring using a
•
pincer. It is advisable to hold the spring with pliers or cover it with a cloth or other device to absorb
the tension, as the pieces might spring out right after the cut.
•
Please note that the spring is in tension when the door opens, so make sure to protect yourself
during fitting and removal.
70
Advertisement
Table of Contents
