Brother DCP-T510W Online User's Manual page 394

6. Move the print head (if needed) to take out any paper remaining in this area. Make sure scraps of paper are
not left in the corners of the machine (1) and (2).
1
IMPORTANT
• DO NOT touch the encoder strip, a thin strip of plastic that stretches across the width of the machine
(1). Doing this may cause damage to the machine.
1
• If the print head is in the right corner as shown in the illustration (2), you cannot move it. Follow these
steps:
a. Close the scanner cover, and then reconnect the power cord.
b. Open the scanner cover again, and then hold down the Stop/Exit button until the print head
moves to the centre.
c. Unplug the machine from the power source and remove the jammed paper.
2
388