Brother DCP-T510W Online User's Manual page 302
Hide thumbs
Also See for DCP-T510W:
- Quick start manual ,
- User manual (579 pages) ,
- Reference manual (28 pages)
Table of Contents
Advertisement
Home >
Network
>
Additional Methods of Configuring Your Brother Machine for a Wireless Network
®
Wi-Fi Direct
>
Configure Your Wi-Fi Direct Network
Method
Configure Your Wi-Fi Direct Network Using the PIN Method
Related Models: DCP-T510W/DCP-T710W/MFC-T910DW
>> DCP-T510W/DCP-T710W
>> MFC-T910DW
DCP-T510W/DCP-T710W
If your mobile device supports the PIN Method of Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct
network:
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi
Direct connection request received. Press [OK] to connect.] will appear on the LCD.
Press OK to connect.
1. Press Menu.
2. Press a or b to select the following:
a. Select [Network]. Press OK.
b. Select [Wi-Fi Direct]. Press OK.
c. Select [PIN Code]. Press OK.
3. When [Wi-Fi Direct On?] appears, press a to select [On]. To cancel, press b.
4. Activate your mobile device's WPS PIN configuration method (see your mobile device's user's guide for
instructions) when [Activate Wi-Fi Direct on other device and press OK.] appears. Press
OK on your Brother machine. This will start the Wi-Fi Direct setup.
5. Do one of the following:
•
When your Brother machine is the G/O (Group Owner), it will wait for a connection request from your
mobile device. When [PIN Code] appears, enter the PIN displayed on your mobile device in the
machine. Press OK. Follow the instructions, and then go to the next step. If the PIN is displayed on your
Brother machine, enter the PIN in your mobile device.
•
When your Brother machine is not the G/O (Group Owner), it will display available device names with
which to configure a Wi-Fi Direct network. Select the mobile device to which you want to connect and
press OK. Search for available devices again by selecting [Rescan].
When [Select PIN Method] appears, do one of the following:
-
Press a to display the PIN on your machine and enter the PIN in your mobile device. Follow the
instructions, and then go to the next step.
-
Press b to enter a PIN shown on your mobile device in the machine, and then press OK. Follow the
instructions, and then go to the next step.
6. If your mobile device connects successfully, the machine's LCD displays [Connected]. You have completed
the Wi-Fi Direct network setup.
MFC-T910DW
If your mobile device supports the PIN Method of Wi-Fi Direct, follow these steps to configure a Wi-Fi Direct
network:
When the machine receives the Wi-Fi Direct request from your mobile device, the message [Wi-Fi
Direct connection request received.] will appear on the LCD. Press c to connect.
1. Press Settings.
> Configure Your Wi-Fi Direct Network Using the PIN
>
Use
296
Advertisement
Table of Contents
