Brother DCP-T510W Online User's Manual page 501

Home > Machine Settings
Tables > Settings Tables (1 Line LCD)
Settings Tables (1 Line LCD)
Related Models: DCP-T310/DCP-T510W/DCP-T710W
These tables will help you understand your machine's menu selections and options.
Menu > [Maintenance]
Level 1 Level 2
ImproveQuality -
Cleaning -
InkBottleModel -
Print Setting ReduceSmudging Reduce smudging on the paper or paper jams during printing.
Slow Drying
Ink Low Notice -
Menu > [General Setup]
Level 1
Tray Setting
(DCP-T510W/
DCP-T710W)
Ecology
LCD Contrast
Menu > [Copy]
Level 1 Descriptions
Density Adjust the density.
Quality Select the Copy resolution for your document type.
Menu > [Network] (DCP-T510W/DCP-T710W)
Level 1
WLAN
> Change Machine Settings from the Control Panel
Descriptions
Check and correct the print quality, alignment and paper feeding according
to the LCD instructions.
Clean the print head according to the LCD instructions.
Check the ink bottle numbers.
Use this setting when printing with a type of plain paper on which the ink
dries very slowly.
Set the machine to display the ink low messages.
Level 2 Descriptions
Paper Type Set the type of paper in the paper tray.
Paper Size Set the size of paper in the paper tray.
Check Paper Check the paper type and paper size when you pull the tray out of the
machine.
Sleep Mode Select how long the machine must be idle before it goes into Sleep
Mode.
Quiet Mode Decrease printing noise.
Auto Power Select how long the machine must wait before it automatically turns
Off itself off after entering Sleep Mode.
When set to Off, the machine will not power off automatically.
- Adjusts the contrast of the LCD.
Level 2 Level 3
TCP/IP BOOT Method Select the Boot method that best suits your needs.
IP Address
Subnet Mask Enter the Subnet mask.
Gateway
Node Name
Descriptions
Enter the IP address.
Enter the Gateway address.
Enter the Node name.
> Settings and Features
495