Page 1
High Temperature Evaporation Loss Tester Operation and Instruction Manual REV B Koehler Instrument Company, Inc. 1595 Sycamore Avenue • Bohemia, New York 11716-1796 • USA Toll Free: 1-800-878-9070 (US only) • Tel: +1 631 589 3800 • Fax: +1 631 589 3815 http://www.koehlerinstrument.com •...
Page 3
Operation and Instruction Manual CERTIFICATE OF CONFORMANCE High Temperature Evaporation Loss Tester K29300 This certificate verifies that part number K29300, High Temperature Evaporation Loss Tester, was manufactured in conformance with the applicable standards set forth in this certification. Specifications: ASTM D2595...
Page 4
K29300 High Temperature Evaporation Loss Tester & Software Operation and Instruction Manual K29300-Manual...
K29300 High Temperature Evaporation Loss Tester & Software Operation and Instruction Manual Table of Contents Introduction ........................4 1.1 Koehler’s Commitment to Our Customers ..................4 1.2 Recommended Resources and Publications ..................4 1.3 Instrument Specifications ........................4 1.4 Software Specifications........................4 Safety Information and Warnings ................
Thermometer sold separately) to better understand your requirements and Exit Air provide you with the best solutions. You can Temperature depend on Koehler for a full range of accurate and Stability: ±1.1°C (±2°F) reliable instrumentation as well as support for your Capacity: 2 Samples laboratory testing programs.
K29300 High Temperature Evaporation Loss Tester & Software Operation and Instruction Manual Memory 256Mb RAM (512Mb RAM Requirements: recommended) 15 Mb Hard Packing List Disk Space (minimum) K29300 High Temperature Evaporation Loss Other Two RS-232 communication Tester ports K29300-Manual High Temperature Evaporation Microsoft®...
K29300 High Temperature Evaporation Loss Tester & Software Operation and Instruction Manual recorder to be used (not supplied). Install and adjust the thermocouples in the thermocouple support tube per the ASTM method. Install test thermometer. Ventilation. A fume hood or exhaust system is required when operating the unit.
K29300 High Temperature Evaporation Loss Tester & Software Operation and Instruction Manual the amount of heat input to the left and right 0- 1. Process Temperature Display. 500W variable control heaters. upper red LED display shows the process temperature can be displayed by means of a temperature as read from the RTD probe.
K29300 High Temperature Evaporation Loss Tester & Software Operation and Instruction Manual is a value observed in the upper red LED with bottom edge tube. Fasten display, add it to the calculated difference thermocouple securely this position obtained in the previous step. This is the compressing the top edge of the tube.
K29300 High Temperature Evaporation Loss Tester & Software Operation and Instruction Manual 2. Determine the source of the problem and correct the situation. 7.2 Replacement Parts 3. Restart the unit. Monitor the operations to ensure that the unit is operating properly. If...
K29300 High Temperature Evaporation Loss Tester & Software Operation and Instruction Manual K293-0-12 Flow Meter Calibration Chart -11- K29300-Manual...
Warranty Unit is on and keeps resetting into start up routine We, at Koehler, would like to thank you for your equipment purchase, which is protected by the For 220V units, make sure that the socket following warranty.
K29300 High Temperature Evaporation Loss Tester & Software Operation and Instruction Manual Returned Goods Policy To return products for credit or replacement, please contact Koehler Customer Service with your purchase order number, packing list/invoice number, the item(s) to be returned and the reason for the return.
Need help?
Do you have a question about the K29300 and is the answer not in the manual?
Questions and answers