Page 1
Water Separability Tester Operation and Instruction Manual REV D Koehler Instrument Company, Inc. 1595 Sycamore Avenue • Bohemia, New York 11716-1796 • USA Toll Free: 1-800-878-9070 (US only) • Tel: +1 631 589 3800 • Fax: +1 631 589 3815 http://www.koehlerinstrument.com •...
Page 3
NF T 60-125 This unit is tested before it leaves the factory, to ensure total functionality and compliance to the above specifications and ASTM standards. Test and inspection records are on file for verification. Jesse Kelly Application Engineer Koehler Instrument Company...
Page 5
Responsibility for Registration and Annual Reporting: Koehler will not sell directly to end users in the EU and so has no responsibility to register within each EU state and to make annual reports. Koehler declares that this responsibility is born by the importer who is the first level of the distribution chain and is subject to producer responsibility.
Page 6
K394XX Water Separability Tester Operation and Instruction Manual this. All Koehler equipment has been placed on the market since 13th August 2005 and so Koehler is defined as a "new WEEE producer". As such we must provide information on refurbishment, treatment, and re-use.
• FTM 791-3201: Water Separability of with the best solutions. You can depend on Petroleum Oils and Synthetic Fluids Koehler for a full range of accurate and reliable instrumentation as well as support for your Instrument Specifications laboratory testing programs. Please do not...
• personal injury and/or property loss. 250-000-21C ASTM 21C Thermometer • Replacement parts must be O.E.M. exact K39400-SFW Water Separability Data replacement equipment. Acquisition Software Unit Design: This equipment is specifically Unpacking designed for use in accordance with the 1. Check Shock Watch Label on Cardboard...
Do NOT turn the power on unless the the unit. Please note that Koehler does not bath is filled with the proper medium; otherwise, supply a level with this equipment.
K394XX Water Separability Tester Operation and Instruction Manual 4 Descriptions for stabilizing the bath temperature to desired setting within ± 0.05°C. Description of Instrument Controls 6. Cylinder Ports: The test cylinder is placed into the heating bath through one of the seven (7) cylinder ports.
Page 12
Auto Tune. This routine allows the digital comes pre-programmed from temperature control to learn the heating Koehler factory. Please do NOT attempt parameters needed for any particular set to re-program the digital temperature point temperature. This operation should be controller as this will void the product done when installing a new unit, after warranty.
15 - 50°C* Distilled water is Mandatory 2. Verify Temperature controller calibration in accordance to an external temperature 50 - 95°C Koehler supplies highly reader and set the desired operation refined white technical oil temperature using the temperature controller (part # 355-001-001) that (See Section 4.3 for full operational details).
Page 14
K394XX Water Separability Tester Operation and Instruction Manual equilibrium of the bath and cause erroneous test results. 4. Use the black knob on the stirrer shaft for extending and retracting the shaft to prevent sample contamination. 5. Raise the stirrer shaft until it is in the fully retracted position and ensure the stirrer shaft paddle will not hit the cylinder when the head assembly is moved.
K394XX Water Separability Tester Operation and Instruction Manual 5.4 Test Control Panel Operation Figure 9: Start Up Screen Figure 6. Incorrect Figure 7. Correct Setting the Speed and Timer WARNING: The stirrer shaft must be fully engaged and locked in place before starting stirrer motor.
K394XX Water Separability Tester Operation and Instruction Manual 6 Safety Features The Koehler Water Separability Apparatus is equipped with several safety and protection features, which are described in the following sections. Figure 11 . Stirrer Not Engaged WARNING: The bath is Explosion Proof.
If you have any questions about maintaining your equipment, Replacement Parts please do not hesitate to contact the Koehler When ordering replacement part(s), please technical service department. provide the model number, serial number, and...
Need help?
Do you have a question about the K39400 and is the answer not in the manual?
Questions and answers