Installing The Newborn Comfort Insert - Britax Steelcraft one 2 Instruction Manual

Stroller Assembly

Installing the Newborn Comfort Insert

Sold Separately
IMPORTANT NOTES:
• Do not use newborn back support
wedge in bassinet mode.
• The newborn back support wedge has
been designed to help improve and
provide a more supportive seating
position for newborn or lower birth
weight babies.
• The stroller seat should be used in the
fully reclined position with the newborn
back support wedge.
• The newborn back support wedge
should be removed as your baby grows.
• While using this product regularly
check to ensure that the harness straps
remain tight.
• Ensure that the shoulder straps are fitted
through the appropriate harness slots to
suit your child' s seated shoulder height.
A
Wedge
B
A
To use the newborn
back support wedge,
place the newborn back
support wedge firmly in
the seat.
B
Place the insert on the
stroller seat and thread
the waist and shoulder
harness straps through
the buttonholes in the
back of the seat insert.
ONE 2 | 19
V2