Abbreviations Used; General Safety Instructions; Intended Use - TE Connectivity HT11K Operating Instructions Manual

Hand tool th 0.25 terminals

Hide thumbs Also See for HT11K:

Table of Contents

2.1 Abbreviations used

Abbreviation

RoHS

The hand tool has been manufactured in accordance with the generally accepted codes of practice.

Nonetheless, there is a risk of personal injury and material damage if the following general safety in-

structions and the warnings preceding the individul operating instructions are not followed.

Read the instructions thoroughly and completely before working with the hand tool.

Keep these instructions in a place where they are accessible to all users at all times.

These operating instructions must accompany the hand tool if it is passed on to a third party.

RoHS information

Information on the presence and location of substances subject to RoHS guidelines (Restriction on

Hazardous Substances) can be found on the following website:

http://www.te.com/en/resources/product-compliance.html

Select 'Check Product Compliance and get Statements of Compliance (SoC)' and enter the respective

part numbers.

The hand tool is used to crimp TH 0.25 terminals according to the TE processing specification and

drawing, as mentioned in Section 5.

The hand tool may only be used for repair purposes or for making samples, not for series production.

The hand tool is not a product in the sense of the EU Machinery Directive 2006/42/EC.

All International Rights Reserved

TE logo and Tyco Electronics are trademarks.

*Trademark. Other products, logos, and company names used are the property of their respective owners.

Meaning

Part number

Restriction of (the use of certain) hazardous substances

5/14

Operating Instructions

2-744017-4

Rev A2

Table of Contents

7-1579014-1 7-1579014-2 7-1579014-3