While Working With The Hand Tool; Disposal; User Obligations - TE Connectivity HT11K Operating Instructions Manual

Prior to use, ensure that all components belonging to the hand tool are present and in a perfect
condition. If in doubt, do not use the hand tool or its components.
If there are any visible defects or damage or if the hand tool no longer functions properly, the hand
tool must be sent in.
The warranty applies exclusively to the configuration provided.
The warranty is voided in the event of use other than as intended or improper use.

3.4.2 While working with the hand tool

Only instructed personnel may work with the hand tool within the scope of the intended purpose.

3.4.3 Disposal

Dispose of the tool in compliance with the environmental rules described in Section 9 "Disposal".

3.5 User obligations

The user of the hand tool from TE Connectivity Ltd. must train their personnel on the following mat-
ters:
Following and using the operating instructions and observing statutory provisions.
Intended use of the hand tool.
©2009 Tyco Electronics Corporation, Harrisburg, PA
All International Rights Reserved
TE logo and Tyco Electronics are trademarks.
*Trademark. Other products, logos, and company names used are the property of their respective owners.
7/14
8
Operating Instructions
2-744017-4
Rev A2