Rj45 Connector Cn1006; Usb 3.0A 1/2 Cn1003/Cn1004 - HP E45c G5 Maintenance And Service Manual

3) Lift the CN504 connector from the circuit board
4) Place the new component on the circuit board. Be sure that it matches the footprint.
5) Solder the new component.

RJ45 connector CN1006

Repair the RJ45 connector:
1） Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
2) Lift the CN1006 connector from the circuit board.
3) Place the new component on the circuit board. Be sure that it matches the footprint.
4) Solder the new component.

USB 3.0A 1/2 CN1003/CN1004

Repair the USB 3.0A 1/2 connector:
1) Use a soldering iron and a de-soldering pump to remove as much solder as possible from the pin.
24