Download Print this page


HP LP3065 30" LCD Monitor
User Guide


   Also See for HP LP3065

   Related Manuals for HP LP3065

   Summary of Contents for HP LP3065

  • Page 1

    HP LP3065 30" LCD Monitor User Guide...

  • Page 2

    © 2006 Hewlett-Packard Development Company, L.P. Microsoft, Windows, and the Windows logo are trademarks of Microsoft Corporation in the U.S. and other countries. All other product names mentioned herein may be trademarks of their respective companies. Hewlett-Packard Company shall not be liable for technical or editorial errors or omissions contained herein or for incidental or consequential damages in connection with...

  • Page 3: About This Guide

    About This Guide This guide provides information on setting up the monitor, installing drivers, using the on-screen display menu, troubleshooting and technical specifications. WARNING! bodily harm or loss of life. CAUTION Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information.

  • Page 4

    About This Guide ENWW...

  • Page 5: Table Of Contents

    Installing from the CD ... 17 Downloading from the Worldwide Web ... 17 Front Panel Controls ... 17 HP Display LiteSaver ... 18 Installing the HP Display LiteSaver Software ... 18 Appendix A Troubleshooting Solving Common Problems ... 20 Using the Worldwide Web ... 21 Preparing to Call Technical Support ...

  • Page 6

    Appendix B Technical Specifications LP3065 Model ... 22 Energy Saver Feature ... 23 Appendix C Agency Regulatory Notices Federal Communications Commission Notice ... 24 Modifications ... 24 Cables ... 24 Declaration of Conformity for Products Marked with the FCC Logo (United States Only) ... 24 Canadian Notice ...

  • Page 7: Product Features

    USB cable included to connect the monitor's USB hub to the USB connector on the computer ● Accessory rail on monitor to accept optional mounted devices, such as an HP speaker bar ● Plug and play capability if supported by your system ●...

  • Page 8: Safety And Maintenance Guidelines

    This guide is located on the Web at CAUTION For the protection of the monitor, as well as the computer, connect all power cords for the computer and its peripheral devices (such as a monitor, printer, scanner) to some form of surge protection device such as a power strip or Uninterruptible Power Supply (UPS).

  • Page 9: Maintenance Guidelines

    Do not open your monitor cabinet or attempt to service this product yourself. Adjust only those controls that are covered in the operating instructions. If your monitor is not operating properly or has been dropped or damaged, contact your HP authorized dealer, reseller, or service provider. ●...

  • Page 10: Setting Up The Monitor

    Setting Up the Monitor To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other attached devices, then follow the instructions below. NOTE Be sure the master power switch, located on the rear panel of the monitor, is in the off position.

  • Page 11: Rear Components

    NOTE Be sure the pedestal base is securely locked before continuing with the setup. Rear Components Figure 3-2 Rear Components Component Cable Lock Provision Master Power Switch AC Power Connector DVI-D Connectors USB Upstream Connector USB Downstream Connectors ENWW Function Provides slot for use with cable security locks.

  • Page 12: Selecting The Signal Connectors And Cables

    Selecting the Signal Connectors and Cables The monitor features two DVI-D dual-link connectors capable of supporting high resolution digital input. NOTE The high resolution of the monitor requires a dual-link DVI-D input signal. The monitor can only display a 2560 x 1600 resolution; therefore, the computer must support a high- performance video card that is capable of scaling all video modes to 2560 x 1600.

  • Page 13: Connecting The Monitor

    Connecting the Monitor Place the monitor in a convenient, well-ventilated location near your computer. Connect one end of the USB hub cable to the USB connector on the rear panel of the computer, and the other end to the upstream USB connector on the monitor. Figure 3-4 Connecting the USB Cable WARNING!

  • Page 14

    Connect one end of the power cable to the AC power connector on the back of the monitor, and the other end to an electrical wall outlet. Figure 3-5 Connecting the Power Cable Place the cables through the cable management channel on the back of the pedestal base. Figure 3-6 Using the Cable Management Feature Chapter 3 Setting Up the Monitor...

  • Page 15: Adjusting The Monitor

    Adjusting the Monitor Adjust the monitor's panel forward or backward to set it to a comfortable eye level. Figure 3-7 Tilting the Monitor Swivel the monitor to the left or right for the best viewing angle. Figure 3-8 Swiveling the Monitor ENWW Adjusting the Monitor...

  • Page 16

    Adjust the monitor's height so that it is parallel to your eye height for a comfortable viewing position. Figure 3-9 Adjusting the Height NOTE If the display head is locked in the lowest height position, push down on the display head, press the button on the base to unlock, and then lift the monitor display head to the desired height.

  • Page 17: Turning On The Monitor

    The monitor features accessory rails on the rear that may be used to mount optional devices, such as the HP speaker bar, to attach to the LCD. Refer to the documentation included with your optional device for detailed mounting instructions.

  • Page 18: Removing The Monitor Pedestal Base

    Figure 3-11 Using the Accessory Rails Feature Removing the Monitor Pedestal Base You can remove the monitor pedestal to mount the monitor on a wall, a swing arm, or other mounting fixture. CAUTION Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected.

  • Page 19: Mounting The Monitor

    For best performance, it is important to use the power and video cable provided with the monitor. Remove the HP Quick Release from the pedestal base by removing the four screws. Figure 3-13 Removing the HP Quick Release from the Pedestal Base...

  • Page 20

    It is designed to support a maximum of up to 24 lbs. (10.9 kg). If you are mounting to a wall, HP recommends that you consult with a qualified engineering, architectural, or construction professional to determine the appropriate type and quantity of mounting fasteners required for your application and to ensure that your mounting solution is properly installed to support applied loads.

  • Page 21: Locating The Rating Labels

    The rating labels on the monitor provide the spare part number, product number, and serial number. You may need these numbers when contacting HP about your monitor model. The rating labels are located on the rear panel of the monitor display head.

  • Page 22: Operating The Monitor

    NOTE If the monitor does not include a CD, the .INF and .ICM files can be downloaded from the HP monitors support Web site. See The Information File The .INF file defines monitor resources used by Microsoft Windows operating systems to ensure monitor compatibility with the computer’s graphics adapter.

  • Page 23: Installing From The Cd

    CD in the event of an installation error. Refer to the Monitor Driver Software Readme file on the CD. Downloading from the Worldwide Web To download the latest version of .INF and .ICM files from the HP monitors support Web site: Refer to Follow the links for your monitor to the support page and download page.

  • Page 24: Hp Display Litesaver

    Sets the time in minutes before the monitor turns off if there is any keyboard or mouse activity after the Display Off time is reached. If the keyboard or mouse is used, then HP Display LiteSaver waits until the set amount of time before turning the display off again. Set to 0 to disable. If...

  • Page 25

    Display Off time is reached, regardless of keyboard or mouse activity. Displays a popup message in the system tray 1 minute before the monitor is turned off by HP Display LiteSaver.

  • Page 26: Appendix A Troubleshooting

    For example, if the Display Off time is set to 5 minutes from the current time and the Activity Extension is set to 10 minutes, the HP Display LiteSaver will not actually turn off the display until 10 minutes of inactivity has elapsed, even though the Display Off time is 5 minutes from now.

  • Page 27: Using The Worldwide Web

    For the online access to technical support information, self-solve tools, online assistance, community forums of IT experts, broad mutlivendor knowledge base, monitoring and diagnostic tools, go to Preparing to Call Technical Support If you cannot solve a problem using the trouble shooting tips in this section, you may need to call technical support.

  • Page 28: Appendix B Technical Specifications

    Technical Specifications NOTE All performance specifications are provided by the component manufacturers. Performance specifications represent the highest specification of all HP's component manufacturers' typical level specifications for performance and actual performance may vary either higher or lower. LP3065 Model Table B-1...

  • Page 29: Energy Saver Feature

    Table B-1 LP3065 Specifications (continued) Altitude: Operating Storage Power Consumption (maximum) Input Terminal Energy Saver Feature When the monitor is in its normal operating mode, the monitor uses <176 watts of power and the Power light is green. The monitor also supports a reduced power state. The reduced power state will be entered into if the monitor detects the absence of the signal.

  • Page 30: Appendix C Agency Regulatory Notices

    Agency Regulatory Notices Federal Communications Commission Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

  • Page 31: Canadian Notice

    Hewlett Packard Company P. O. Box 692000, Mail Stop 530113 Houston, Texas 77269-2000 Or, call 1-800-HP-INVENT (1-800 474-6836) For questions regarding this FCC declaration, contact: Hewlett Packard Company P. O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product.

  • Page 32: Japanese Notice

    0.75 mm² or 18 AWG, and the length of the cord must be between 6 feet (1.8m) and 12 feet (3.6 m). If you have questions about the type of power cord to use, contact your HP authorized service provider.

  • Page 33: Product Environmental Notices

    Product Environmental Notices Materials Disposal This HP product contains the following materials that might require special handling at end-of-life: ● Mercury in the fluorescent lamp in the display LCD. ● Lead in the solder and some component leads. Disposal of this material can be regulated because of environmental considerations. For disposal or recycling information, contact the local authorities or the Electronic Industries Alliance (EIA)

This manual also for:


Comments to this Manuals

Symbols: 0
Latest comments: