HP EliteDisplay E201 Quickspecs
20-inch led backlit monitor
Hide thumbs
Also See for EliteDisplay E201:
- User manual (40 pages) ,
- Product end-of-life disassembly instructions (8 pages) ,
- User manual (31 pages)
Advertisement
Quick Links
Download this manual
See also:
User Manual
QuickSpecs
Overview
1. Menu
Opens, selects or exits the OSD menu.
2. Minus "-"
If the OSD menu is on, press to navigate
backward through the OSD menu and
decrease adjustment levels.
3. Plus"+"/Input
If the OSD menu is on, press to navigate
forward through the OSD menu and increase
adjustment levels.
If the OSD menu is inactive, press to activate
the source button that chooses the video
signal input (VGA, DVI, or DisplayPort).
Boost Productivity with Dual Monitor Work Solution
(Multi-monitor support depends on your PC capability. Monitors are sold separately.)
DA - 14550 Worldwide — Version 6 — July 12, 2013
HP EliteDisplay E201 20-inch LED Backlit Monitor
4. OK/Auto
If the OSD menu is on, press to select the
highlighted menu item. If the OSD menu is
inactive, press to activate the auto
adjustment feature to optimize the screen
image.
5. Power/Power LED Turns the monitor on or off.
LED:
fully powered = white;
sleep mode = amber;
sleep timer mode = flashing amber.
Page 1
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for HP EliteDisplay E201
Summary of Contents for HP EliteDisplay E201
- Page 1 QuickSpecs HP EliteDisplay E201 20-inch LED Backlit Monitor Overview 1. Menu Opens, selects or exits the OSD menu. 4. OK/Auto If the OSD menu is on, press to select the highlighted menu item. If the OSD menu is 2. Minus "-"...
- Page 2 QuickSpecs HP EliteDisplay E201 20-inch LED Backlit Monitor Overview Model: C9V73AA DA - 14550 Worldwide — Version 6 — July 12, 2013 Page 2...
-
Page 3: Technical Specifications
Color Gamut (typical)* Color Support** Can display up to 16.7 million colors *All performance specifications represent the typical specifications provided by HP's component manufacturers; actual performance may vary either higher or lower. ** With the use of FRC technology. On Screen Display Buttons or Switches Menu, Minus ("-"), Plus ("+") /Input Control, OK/Auto, Power... - Page 4 QuickSpecs HP EliteDisplay E201 20-inch LED Backlit Monitor Technical Specifications Video/Other Inputs Plug and Play Input Connectors VGA (analog), DVI-D, DisplayPort (HDCP support on DVI-D and DisplayPort) Integrated USB 2.0 hub with (2) Downstream and (1) Upstream ports USB Cable (1)USB cable, 1,8 m (5.9 ft)
-
Page 5: Additional Information
This product is in compliance with the Restrictions of Hazardous Substances (RoHS) directive - 2002/95/EC. This HP product is designed to comply with the Waste Electrical and Electronic Equipment (WEEE) Directive - 2002/96/EC. This product is in compliance with California Proposition 65 (State of California;... - Page 6 RoHS Directive on a worldwide basis. By July 1, 2006, RoHS substances will be virtually eliminated (virtually = to levels below legal limits) for all HP electronic products subject to the RoHS Directive, except where it is widely recognized that there is no technically feasible alternative (as indicated by an exemption under the EU RoHS Directive).
- Page 7 HP Integrated Work Designed specifically for use with the HP Compaq Small Form Factor (SFF) Desktop PC and a 17 to 24-inch (43.18 to 60.96 cm) diagonal monitor, the HP Center 2 – Small Form Integrated Work Center 2 (IWC) - Small Form Factor (SFF) provides a portable, Factor (SFF) –...
- Page 8 Compatible with platforms using the VESA standard video modes. Recommended for use with HP products. Service and Warranty Protected by HP, including a 3 year standard limited warranty. Optional Care Pack Services are extended service contracts which go beyond your standard warranties. DA - 14550 Worldwide — Version 6 — July 12, 2013...
- Page 9 ENERGY STAR® is a US registered mark of the United States Environmental Protection Agency. The HP Quick Release has been designed to support a maximum of up to 24 lbs (10.9 kg) for all devices mounted. Because mounting surfaces vary widely and the final mounting method and configuration may vary, mounting fasteners are not supplied (other than the VESA-compliant screws).
Need help?
Do you have a question about the EliteDisplay E201 and is the answer not in the manual?
Questions and answers
I don't know what kind of cable I need . I need a HDMI on one end and the other is not HDMI or VGA from the computer can you help the me I want a bigger screen which I have my computer is HP ELite Desktop INTEL cOREI5 3.1 -GHz,8GB Ram
The HP EliteDisplay E201 monitor supports VGA, DVI-D, and DisplayPort connections. Since the HP Elite Desktop has an HDMI port, an HDMI to DVI-D cable or an HDMI to VGA adapter would be needed to connect the desktop to the monitor.
This answer is automatically generated