Table of Contents
Advertisement
Drive System
Maintenance
Checking the Tire Pressure
Service Interval: Every 25 hours—Check tire pressure.
Maintain the air pressure in the front and rear tires as
specified. Uneven tire pressure can cause uneven cut. Check
the pressure at the valve stem
when they are cold to get the most accurate pressure reading.
Refer to the maximum pressure suggested by the tire
manufacturer on the sidewall of the caster wheel tires.
Inflate the rear drive wheel tires to 90 kPa (13 psi).
Figure 47
1. Valve stem
(Figure
47). Check the tires
Releasing the Electric
Brake
You can manually release the electric brake by rotating the
link arms forward. Once the electric brake is energized, the
brake resets.
1. Turn the ignition key to the
the battery.
2. Locate the shaft on the electric brake where the brake
link arms are connected
3. Rotate the shaft forward to release the brake.
g000554
1. Brake-link arm on the electric brake control module
2. Left, rear tire
38
position or disconnect
OFF
(Figure
48).
Figure 48
g027911
Advertisement
Table of Contents
