Table of Contents
Advertisement
Figure 27
1. Bypass-lever locations
2. Lever position for
operating the machine
6. When finished, turn the key to the S
avoid draining the battery charge.
Note: If the machine fails to move, the electric brake
may still be engaged. You can release the electric brake if
necessary; refer to
Releasing the Electric Brake (page
Operating the Machine
Move the bypass levers rearward through the key hole and
down to lock them in place as shown in
Note: Do this for each lever.
3
1 2
g017303
g017303
3. Lever position for pushing
the machine
position to
TOP
38).
Figure
27.
Transporting the Machine
Use a heavy-duty trailer or truck to transport the machine.
Ensure that the trailer or truck has all necessary brakes,
lighting, and marking as required by law. Please carefully read
all the safety instructions. Knowing this information could
help you, your family, pets, or bystanders avoid injury.
WARNING
Driving on the street or roadway without
turn signals, lights, reflective markings, or a
slow-moving-vehicle emblem is dangerous and can
lead to accidents, causing personal injury.
Do not drive the machine on a public street or
roadway.
1. If you are using a trailer, connect it to the towing
vehicle and connect the safety chains.
2. If applicable, connect the trailer brakes.
3. Load the machine onto the trailer or truck.
4. Shut off the engine, remove the key, set the brake, and
close the fuel valve.
5. Tie down the machine near the front caster wheels and
the rear bumper
25
(Figure
28).
Figure 28
g027708
Advertisement
Table of Contents
