Cleaning The Cooling System - Toro 74766 Operator's Manual

Installing the Spark Plug
Tighten the spark plug(s) to 25 to 30 N∙m (18.5 to 22.1 ft-lb).
A
C
25-30 N-m
18.5-22.1 ft-lb
Figure 42
Cleaning the Cooling
System
Clean the air intake screen from grass and debris before each
use.
1. Disengage the blade-control switch and move the
motion-control levers to the P
2. Shut off the engine, remove the key, and wait for all
moving parts to stop before leaving the operating
position.
3. Remove the air filter from the engine.
4. Remove the engine shroud.
5. To prevent debris entering the air intake, install the air
filter to the filter base.
6. Clean debris and grass from the parts.
7. Remove the air filter and install the engine shroud.
8. Install the air filter.
B
D
g027960
position.
ARK
g027960
34