Adding And Dispensing Chemical Agents; Using Chemical Agents; Dispensing Systems; Labelling The Siphons - Miele PG 8504 Operating Instructions Manual

Labelling the
siphons

Adding and dispensing chemical agents

Using chemical agents

 Only use chemical agents designed specifically for use in
machine and follow the manufacturer's instructions on their
application.
Please observe carefully any instructions relating to non-toxic
residues.
 Caution when using chemical agents. Some agents may be
corrosive and irritant.
The relevant safety regulations and the chemical agent
manufacturer's safety data sheets must be observed.
Wear protective goggles and gloves.
Contact Miele for information about suitable chemical agents.
Highly viscous (thick) chemical agents can affect the dispenser
monitoring and lead to inaccurate data. In this instance please
contact Miele Service for advice.
The viscosity does not affect dosage concentration levels.

Dispensing systems

The machine is equipped with a number of internal dispensing
systems for chemical agents:
– Neutralishing agent or rinsing agent
This is dispensed via a storage reservoir  in the door.
– Powder cleaning agent
This is dispensed via a detergent dispenser  in the door.
Liquid chemical agents from external containers are dispensed by
siphons. Colour coding the siphons can be helpful for correct
dispensing.
Miele use and recommend the following:
– Blue: for cleaning agent
– Red: for neutralising agent
– Green: for chemical disinfection agents or
an additional second cleaning agent
– White: for acidic chemical agent
– Yellow: for free choice
47