Miele PG 8504 Operating Instructions Manual page 119

AD water
connection for 30
- 1000 kPa
pressure -
pressure-
resistant
(optional)
– Install the filter (supplied in accessory pack) between the stopcock
valve and the inlet hose. The filter for AD water is made of
chromium-nickel steel and can be recognised by its dull surface.
IMPORTANT
Australia and New Zealand
For Australia and New Zealand a non-return valve is required
between the tap and filter.
 Do NOT shorten or otherwise damage the inlet hoses (see
diagram).
See installation diagram supplied.
This machine can be optionally supplied for a pressurised system
operating between 30 - 1000 kPa. If the water pressure is below
200 kPa the water intake duration will be automatically increased.
The pressure tested hose for AD water, coded green, has a ¾ inch

threaded union for connection to the onsite stopcock for AD water.
 If the machine is not going to be connected to AD water, the AD
water connection has to be deactivated by a Miele Service
technician. The inlet hose remains in position at the back of the
machine.
Plumbing
119