Further settings
Setting the
standby duration
90
Switch off after (Auto-Off function)
If the machine has not been used for a specific duration, it switches
itself off automatically. Automatic switch-off can be optionally
activated and deactivated.
Open the
Further settings
the button and then switch it on again with the button whilst
keeping the button held in.
Open the menu as follows:
Further settings
Switch off after
–
Yes
The Auto-Off function is activated. A duration must be set after
which automatic switch-off should occur.
–
No
The Auto-Off function is deactivated.
Select an option using the and arrow buttons.
Press OK to save the setting.
If the
Yes
option is displayed, the standby duration after which
automatic switch-off should occur must be set next.
The standby duration can be adjusted in 5 minute increments. The
possible range is shown in the bottom line of the display.
Use the (higher) and (lower) arrow buttons to set the standby
duration.
Press OK to save the setting.
menu by switching the machine off with
Switch off after
Yes
No
Switch off after
60
Min
(5 120
Min
)