Dispensing Systems - Miele PG 8504 Operating Instructions Manual

Dispensing
systems
Individual dispensing systems can be activated or deactivated for all
programmes as follows.
...
 Dispensing system
 DOS... (name of dispensing system)
– Active
The selected dispensing system is activated. Dispensing will only
occur in the appropriate wash blocks (see Programme charts).
–
Inactive
The selected dispensing system is deactivated for all programmes.
Select an option using the  and  arrow buttons.

Press OK to save the setting.

If the dispensing systems have been activated (
options are also available:
–
DOS venting
Vent the dispensing system.
– Concentration
Set the dosage concentration level. The setting applies to all
programmes.
– Change name
Change the name of the dispensing system.
With DOS 2 Rinsing agent
DOS
Active
Inactive
the only option shown is
Further settings
Active ) the following
Concentration .
81