Hazloc Battery Type Detection; Led Indications; Table 1: Led Indications - Motorola APX 8000XE 1.5 User Manual

MN002667A01-AV
Chapter 4 : Status Indicators
Gauge
Top Display:
Top Display:
4.1.2

HAZLOC Battery Type Detection

This feature alerts you when there is a HAZLOC certification mismatch between the radio and the
battery. This feature supports IMPRES batteries only.
During power-up, the following scenarios occur if there is a mismatch:
• The radio continuously displays Wrong Battery with red intelligent backlight.
• The radio Voice Announcement announces the programmed Wrong Battery.
• The battery icon blinks continuously.
• A repetitive tone sounds.
• The red LED blinks continuously.
NOTE:
The radio alerts you when NNTN8921and NNTN8930 batteries are attached to the radio
because these batteries are not supported. The radio is not HAZLOC-certified and resets if
these batteries are used. Refer to the radio FM or UL Manual for more information.
The radio does not display any indication when the radio is connected to the charger, the radio
and battery match, or when the radio certification type is configured as None in Customer
Programming Software (CPS).
This feature is enabled through CPS configuration. Check with your dealer or system administrator for
more information.
4.2

LED Indications

The LED indications represent the operational status of your radio. A qualified technician can
permanently disable the LED indication by programming it.

Table 1: LED Indications

Indication
Solid red
Blinking red
22
Battery Charge
11% to 25%
10% or less (The gauge begins blinking at 10%)
Status
Radio is transmitting.
Radio is transmitting at low battery condition.Radio is transmitting at low
battery condition or detects an incompatible battery.
1