Hazloc Battery Type Detection; Led Indications; Table 3: Led Indications - Motorola APX 4000 User Manual

68012004058-HV
Chapter 4 : Status Indicators
Procedure:
1 or to Batt.
2 Press the Menu Select button directly below Batt.
Your radio displays the following result:
Charge Percentage
Percentage of current battery capacity.
Remaining Capacity
Remaining power of the battery in mAh.
Estimated Charges
Number of charges cycles the battery has gone through.
3 To return to the Home screen, press the Menu Select button directly below Exit.
4.1.3

HAZLOC Battery Type Detection

This feature alerts you when there is a HAZLOC certification mismatch between the radio and the
battery. This feature supports IMPRES batteries only.
During power-up, the following scenarios occur if there is a mismatch:
• The radio continuously displays Wrong Battery with red intelligent backlight.
• The radio Voice Announcement announces the programmed Wrong Battery.
• The battery icon blinks continuously.
• A repetitive tone sounds.
• The red LED blinks continuously.
NOTE:
The radio does not display any indication when the radio is connected to the charger, the radio
and battery match, or when the radio certification type is configured as None in Customer
Programming Software (CPS).
This feature is enabled through CPS configuration. Check with your dealer or system administrator for
more information.
4.2

LED Indications

The LED indications represent the operational status of your radio. A qualified technician can
permanently disable the LED indication by programming it.

Table 3: LED Indications

Indication
Solid red
Blinking red
Double blinking red
Rapid blinking red
30
Status
Radio is transmitting.
Radio is transmitting at low battery condition.
Radio is transmitting an emergency alarm or call.
Radio has failed the self-test upon powering up or encountered a fatal
error.