Handling And Storage - BorMann BBP5130 Manual

EN
Machine vibrates.
Wheel will not cut/grind.
Important: Please note, all repairs/service should be carried out by a qualified person.

Handling and Storage

Care must be taken when handling this product.
Dropping this power tool could have an effect on its accuracy and could also result in personal injury. This product is not a toy and must be respected.
Environmental conditions can have a detrimental effect on this product if neglected.
Exposure to damp air can gradually corrode components.
If the product is unprotected from dust and debris, components will become clogged.
If not cleaned and maintained correctly or regularly the machine will not perform at its best.
Disposal
At the end of the machine's working life or when it can no longer be repaired, ensure that it is disposed of according to national regulations.
— Contact your local authority for details of collection schemes in your area.
In all circumstances:
• DO not dispose Of power tools with domestic waste.
• DO not incinerate.
• Do not dispose of WEEE as unsorted municipal waste.
Warning!
• Do not put battery pack in fire or mutilate; cells may burst or release toxic materials.
• Do not short circuit cells, may cause burns.
• The battery pack must be removed from the appliance before it is scrapped.
• The battery pack is to be disposed of safely.
• Do not mutilate batteries; corrosive electrolyte will be released.
• Do not dispose of batteries or cells in a charged condition.
Expired batteries must be recycled/disposed of in accordance with the appropriate regulation or legislation. They should be returned to your local warranty
agent/stockist.
* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of the
products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be
included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried out by
technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer
shall not be liable for injuries and damages resulting from the use of non-conforming equipment.
7
1. Wheel damaged or out of balance.
2. Wheel loose.
Incorrect disc fitted.
WWW.NIKOLAOUTOOLS.GR
1. Replace wheel.
2. Stop machine immediately
- When stopped, refit accessory.
Fit correct disc for material/application.