Specifications; Technical Data - BorMann BAP1200 Manual

E N
CAUTION: Never touch the air compressor or fittings connected to the air compressor other than the on/off
switch with bare hands during or immediately after use. Leader hose and fittings on extension hose will become
very HOT during and after use. If necessary wear heat resistant gloves to remove extension hose from the leader
hose.

Specifications

* The manufacturer reserves the right to make minor changes to product design and technical specifications without prior notice unless these changes significantly affect the performance and safety of
the products. The parts described / illustrated in the pages of the manual that you hold in your hands may also concern other models of the manufacturer's product line with similar features and may not be
included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection, repair or replacement work, including maintenance and special adjustments, must only be carried
out by technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided equipment may cause malfunctions or even serious injury or death. The manufacturer and the importer
shall not be liable for injuries and damages resulting f om the use of non-conforming equipment.
4

Technical Data

Model BAP1200
Power supply DC12V
Rated current 25A
Cylinder diameter 2*30mm
Max pressure 150psi
Max duty cycle 40 minutes
Air hose 0.25m+5m PU
Cord length 3m
Net weight 3.5kg
Product size 32*24*25cm
Features Led light
WWW.NIKOLAOUTOOLS.GR